Automatic Self-Cleaning Filtration System
بخش : Products
The Company has been involved in design, supply, installation and commissioning of domestic and industrial wastewater treatment plants, drinking water, well water and cooling water filtration applications.
Application areas of our filteration systems are as follows:
Cooling towers act in a similar way to air scrubbers by collecting all particles from the surrounding environment into the cooling water. These particles, such as dust and sand attach easily to the hot surfaces during the circulation inside cooling system, and cause clogging, fouling and reduction in efficiency of the process, which results the shutdown of the system for cleaning. Efficient filtration is very important for maintaining the continuous operation of the cooling system. By using our Automatic Self-Cleaning Filters in the cooling system, either as side stream or full flow applications, you will avoid all above mentioned problems in your systems.
The quality of cooling water is crucial for the manufacturing of high quality steel. If cooling water contains particles which clog the spray nozzles, this will lower the quality of the end product. This may also lead to serious losses in production due to the unscheduled shut down of production lines. Automatic Self-Cleaning Filters, by the removal of particles contained in the cooling water, provide a perfect solution to prevent clogging of the nozzles and to maintain continuous production.
Sea Water Filteration:
The size of dirt particles contained in sea water varies widely. Therefore sea water filtration needs more care than other fluids. A very special filtration solution is required to remove particles from 10 mm at one end of the spectrum down 50 microns particles at the other. It requires filtrating both coarse and fine particles at the same time. Our Automatic Self-Cleaning Filters are used for sea water filtration on offshore Platforms and Jetties.